Prisma app for ios install#
Prisma app for ios android#
Prisma app for ios Bluetooth#

You can connect to Wifi either by using iOS AirPlay speaker setup, Prisma Android appВ or Google Home app.

The network LED will flash blue when the NP5 Prisma MK2 is ready to be set up by WiFi.

You will now be able to cast music to your NP5 Prisma MK2.

Once you have configured the NP5 Prisma MK2 using the Google Home app the network LED will change from flashing green to solid green.

If you cannot hear the test sound you may need to increase the volume on your amplifier.

The network LED will flash green and a test tone will be played and you will be prompted to select a name for your NP5 Prisma MK2.

Click SET UP and follow the instructions.

The Google Home app will display Set up NP5 Prisma.

Prisma app for ios Bluetooth#

Enable Bluetooth and Wifi on your mobile device.

Open the Google Home app and follow the instructions for setting up the NP5 Prisma MK2 on your network in the Chromecast Built-in Quick Start Guide, or the brief description below.

Prisma app for ios install#

Install the free Google Home app on your mobile device.To take advantage of Chromecast built-in related features and functionality вЂ“ such as casting, voice control, and multi-room/multi-zone configuration and control вЂ“ configuration must be done through Google Home app, with a Google account. If the network LED is flashing blue, make sure your Ethernet cable is connected and it has a network connection. Using ethernet connection provides immediate access to your network and the network LED will show solid green.Connect an Ethernet cable between your router and the LAN socket on the back panel of the NP5 Prisma MK2.The Power/Source LED will show solid white light when startup is complete. The NP5 Prisma MK2 requires one to two minutes to completely start up please be patient. 4 Connect to a networkДЇor best results we recommend connecting using an Ethernet network cable. Once connected to power it will directly power on. WARNING: Always disconnect the NP5 Prisma MK2 from the mains power before connecting or disconnecting any cables. Plug the power supply to DC input on the NP5 Prisma MK2, and connect it to a wall socket (use the appropriate socket adapter).For best results we recommend connecting via cable. If you want your NP5 Prisma MK2 connected via Ethernet cable, connect the cable before you connect your NP5 Prisma MK2 to power.For more information see RS232 Link setup. The NP5 Prisma MK2 can also be connected to another Primare device via RS232 to provide control of basic functions (standby on/off, mute, volume up/down, and input selection next/previous) from the Prisma application. Leave the Output option set to Variable (default).ДЄlternatively, if you want to use the NP5 Prisma MK2 as a source, and adjust volume in a connected component:.If you want to control the volume from the NP5 Prisma MK2: Connect one of the digital outputs from the NP5 Prisma MK2 to an appropriate digital input.The NP5 Prisma MK2 Network Player provides one coax digital output and one optical digital output for connection to a digital input. We recommend you retain the packaging in case you need to transport the unit at a later date. If any of these items are missing please contact your supplier. Getting started 1 Unpack the NP5 Prisma MK2